I have been able to change the color of a bumper without any problem. But now, after having put the codex, when I press enter, it shows the old colour. I can't change the colour. I have done a screen recording to show you what the problem is but it seems like we cannot upload video in apple community discussions.
Thank you for your help!
MacBook Pro 16″, macOS 14.6
There is probably a typo: 7203f65 is not a valid Hex color. There should be six hexadecimal digits, but you are typing seven.
This explains why it is not accepted. Check the source for the correct value that you are supposed to input there.
There is probably a typo: 7203f65 is not a valid Hex color. There should be six hexadecimal digits, but you are typing seven.
This explains why it is not accepted. Check the source for the correct value that you are supposed to input there.
Hello, it seems like a have a problem with a specific color 7203f65. When I enter it and click enter, it doesn't accept it and put the old codex instead. It is only by manually putting the number in the RVB is that to say 32/63/101 that FCP accept it. So I wonder if it is not the codex the problem more than FCP.
It is a little unclear what exactly you are doing.
You seem to be adjusting some color, but what do you mean "put the codex"?
I believe you need to reach level 2 in this forum to post video links, but you can at least post some screenshots to illustrate the problem.
Could you please provide some screenshots of the color box selection process?
As luis said, the colour is a 6 digit number.
Cannot change the color of a bumper in Final Cut Pro
