Level 1

10 points

logic pro stuck on complete sound packs say stopped

help me please with this problem it happened after my mac installed the new logic pro 2025 update

MacBook Air 13″, macOS 14.7

Posted on May 31, 2025 08:47 AM

Reply

Similar questions

Logic X: Playback randomly stopping and jumping back to cycle start Hi, I've got an issue where playback is stopping randomly and starting again. When I have a loop/cycle running it throws me back to the start when I dont have loop/cycle on it stutters as playback stops and starts again. Mac Pro (Late 2013) 3.7 GHz Quad-Core Intel Xeon E5 16 GB 1866 MHz DDR3 OWC Aura Pro X2 Monterey 12.6.1 Logic X 10.7.6 The issue still occurs in a fresh project with plugins deactivated. The issue still occurs after bypassing external instruments The issue still occurs when I disconnect my keyboard (I thought it might be a busted space bar) Please help this is a nightmare as it prevents me from be able to record and is massively disrupting to work flow!
781 1
Logic Pro 11 crashing on play after update At this point, I'm sort of lost. I think that it has to do with some 3rd party plugin that I'm using. But if I start a new project and insert my 3rd party plugins, the project will play fine. However nearly all of my older projects are crashing the minute I press play. Spinning wheel sits forever, Logic application not responding. I checked my computer diagnostics and it seems like my mac is running fine, even when it crashes. Looking for any new ideas to try to fix this issue.
999 3
Suspect LogicPro App corrupt as cannot get Audio sound 2 days ago MacMini Pro M2 with LogicPro v 11.1 would not produce any sound from any Audio Track, except some crackling sounds. Thought to be the Apogee Quartet or its USB cord; but, Arturia MiniFuse 4 does the same. Thought perhaps Godin MultiAc Spectrum SA pickups/electronics; but, a Tacoma Aoustic does the same; and both work on my 2014 iMac Big Sur using MiniFuse 4 or Apogee Quartet. Reinstalled macOS Sonoma 14.7.2, and now get signal all the way to the outputs; but, no signal from top meter to studio monitors. Tried 3 different sets. Used numerous cords for all connections. Exact configuration worked perfectly for years. Now, it must be SW - LogicPro App, or HW - the 2023 MacMini Pro M2 - HW vs SW problem? However, Plug-Ins all work fine and get sound from all using Novation 37 key MIDI keyboard. System alert sounds work fine. This is only LogicPro Audio Track sound output problem, as far as I have determined. There is an update for LogicPro, v 11.1 to 11.1.2. Thinking of Deleting the LogicPro App first; but, can one do this without losing your setup, configurations and other changes that might be kept in contents? Perhaps try the update hoping to fix problem first? If that does ot work, the MacMini Pro M2 is under Warranty until April with Apple Care+. Not looking forward to a Support session, as you rarely get someone knowledgeable with LogicPro. Any suggestion how to proceed before I try an update to 11.1.2? Best, Seth
479 3

3 replies

Level 1

10 points

May 31, 2025 01:48 PM in response to EddieGrey

Don’t worry i fixed it just reinstall macOS sequoia with my Time Machine backup everything works grate

Reply

Level 4

2,000 points

May 31, 2025 01:01 PM in response to Ben_553

Check out this thread:

How can I reinstall Logic sound packs opt… - Apple Community

This should help.

Reply

Level 4

2,000 points

May 31, 2025 01:32 PM in response to Ben_553

Try to uninstall and reinstall Logic Pro via the App Store. Also, be sure to check your Wi-Fi connection. Hope this helps.

Reply

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

logic pro stuck on complete sound packs say stopped

Welcome to Apple Support Community

A forum where Apple customers help each other with their products. Get started with your Apple Account.

Learn more Sign up