Logic Pro, Inputs 1 and 2 both picking up input 1!

Question

Level 1

9 points

Logic Pro, Inputs 1 and 2 both picking up input 1!

Im using the latest version of Logic Pro on a m! pro, 2021 MacBook Pro. I am using a steinburg UR 12 interface with a guitar plugged into input two. The interface reads the input, the system settings read the input, and the direct monitoring reads the input as well. However, in logic when I select input 2, it picks up the input 1 channel. And input 1 picks up input 1. I've got all the correct drivers and firmware on the interface on its latest; what am I missing here! I've reinstalled logic and everything.

MacBook Pro (M1, 2020)

Posted on Nov 21, 2023 1:35 AM

Reply

Answer 1

dabulon

Level 1

8 points

Mar 31, 2024 1:22 PM in response to dabulon

It turns out the problem is caused by the Voice isolation setting you can turn on in the menubar when starting Logic Pro - turn that off and the inputs work as expected again.

Reply

Answer 2

dabulon

Level 1

8 points

Mar 30, 2024 11:12 PM in response to CMAN25

I'm having exact same issues on 2021 MacBook Pro running latest Logic Pro and Sonoma 14.4.1. When I try with Garageband the inputs work correctly, but in Logic Pro they worked for a single recording, then locked together so that both get whatever is coming in on input 1. I have an old Roland Duo-Capture EX in compatible mode so no vendor drivers are being used. If you solve the issue, please let us know. - Dab

Reply

Answer 3

Jul 14, 2024 8:16 PM in response to dabulon

Can you please elaborate on where to find this setting

Reply

Answer 4

yoyoBen

Level 4

3,329 points

Jul 15, 2024 1:02 AM in response to JoshFilmsYou

Set the Mac's "Mic Mode" to Standard. Click on the orange microphone icon in the top main menu bar when a Logic window is active or look in the control center of your mac.

Reply

Logic Pro, Inputs 1 and 2 both picking up input 1!

Similar questions