Apple TV stopped working mid show and wont come back. Is it down?

I was watching Masters of Air and it stopped working mid show as well

Yea. The ap stopped responding on my tv and phone. Every other ap is fine. I do not have the apple tv device. I use the ap in the smart tv. Never had this issue. Beat.

This exact problem just happened to me. Checked everything, unplugged Apple TV and TV for 30 seconds and it is still not working. It seems to be responding to the remote but nothing is being displayed on the TV

Did you ever find a fix? Having same problem. Every other streaming platform works. Apple TV doesn’t work on any of my devices.

☹️

Same issue.

My Apple TV stopped mid-show. Every other streaming device is fine. What’s up!!!

Having the exact same issue. Quit working middle of a show and now I can’t get it up and running again.

Hi!

It's unclear what you mean by Apple TV not working, but, I can try to point you in the right direction.

First, make sure all cables are properly plugged into the Apple TV. The middle cable is most likely your HDMI cable (90% of the time people use HDMI to connect these to their TV). So check the HDMI to ensure it's connected to the Apple TV and your TV itself. If that doesn't work, does the power light work on the Apple TV? If it isn't on, check that the power cable (Left side of cluster facing) is connected to an outlet and to the Apple TV.

Another common issue is your source - grab your actual TV remote, and open up the source switcher menu, and scroll through the HDMI sources (assuming you're on HDMI), until you find the one that your Apple TV is broadcasting to.

That's all I can think of. Good luck!

Mine did the same thing last night. Watching a program and it simply turned off and will not come back on. No other changes, bad weather, power problems or any external situation to cause this. What can we do to get Apple’s attention about this issue? Any ideas out there?

Go into fire stick settings >> displays & sounds >> HDMI CEC Device Control and turn it OFF. Open Apple app. It should load. Go back to fire settings and turn feature back ON. Apple app works normally.