3 Not Mounted in Disk Utility

I did Command R Enter and went to disk Utility

This is a2013 late Mac Pro laptop

please see pic

in container3 it shows

Mac HD 16.52 GB

Mac Data 18.37 GB

3 Not Mounted 1.05

Free 216.05

what action should I take to fix not mounted?

I have recently Reinstalled Big Sur if that helps the question. Id erased both macc had and data and

thankyou for any help

it keeps shutting down while using

but works well in safe mode

battery recently replaced and one fan by Apple repairs

Posted on Dec 11, 2022 03:37 PM

Similar questions

Issue with WD My Passport, Mac not enabling mount of a previously perfectly working external hard drive configured for Mac. Hi, While using Final Cut Pro yesterday, which backs up to a WD My Passport external hard drive, the program was running sluggish, so I rebooted the MAC and it stopped recognising the external drive. This was greyed out in Disk Utility, after many attempts I have been able to run First aid, but this has been running for over2 hours. The hard drive is 5T with around 73% left of storage. Would this be normal or is it locked? Should I force quit? Apple support have advised the external drive may compromised and I should reset it, but I'm loathe to lose the data stored on it - as this was my backup, if this is not the issue and the drive can be repaired. Any ideas please??? Thank you
1613 2
Help with hard drive set up? I recently did a clean reinstall of macOS Monetary and Windows Bootcamp. But I'm not sure if my Hard drive is set up correctly, as there are some oddities I have noticed: Oddity 1: Disk Utility Oddity When I look at my hard drive in Disk Utility, there is a mystery partition called Container disk 1 and Container disk 2: The container disk can only be erased, but not removed. I've Google around and lots of forums say that's normal. However, having 110GB taken up like that seems like a waste of space. Is it normal? Also, what is a snapshot drive? There is also OSXRESEVRED. This is not a drive I made. I think it came when I did the Monterey install. Oddity 2: Boot menu Oddity If I restart MacOS and hold down alt, the boot menu shows the following: It's showing two windows drives, but I only have one. Also, the spinning icon spins continually. In fact, when I select the Mac drive, the icon continues to spin: Oddity 3: Boot Camp Oddity When I am in bootcamp and select "Restart in MacOs" it says "Could not locate OSX Boot Volume" I am not sure if that means anything significant. Terminal Output Here is how my drives look via terminal using the command: diskutil list internal Code: /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI ⁨EFI⁩ 209.7 MB disk0s1 2: Apple_APFS ⁨Container disk2⁩ 819.0 GB disk0s2 3: Microsoft Basic Data ⁨OSXRESERVED⁩ 10.0 GB disk0s3 4: Microsoft Basic Data ⁨BOOTCAMP⁩ 60.9 GB disk0s4 5: Apple_APFS ⁨Container disk1⁩ 110.5 GB disk0s5 /dev/disk1 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +110.5 GB disk1 Physical Store disk0s5 /dev/disk2 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +819.0 GB disk2 Physical Store disk0s2 1: APFS Volume ⁨Macintosh HD - Data⁩ 51.4 GB disk2s1 2: APFS Volume ⁨Preboot⁩ 512.3 MB disk2s2 3: APFS Volume ⁨Recovery⁩ 4.2 GB disk2s3 4: APFS Volume ⁨VM⁩ 1.1 GB disk2s4 5: APFS Volume ⁨Macintosh HD⁩ 15.2 GB disk2s8 6: APFS Snapshot ⁨com.apple.os.update-...⁩ 15.2 GB disk2s8s1 Is this all normal? If not, how do I go about fixing it? I am happy to do a clean install, but how do I do it correctly, so I can wipe away all the mystery partitions? Also, do I select AFPS, Master Boot record, Apple partition Map. There's a lot of options, and I am not sure what is right (and I suspect that's how I got into this in the first place!)
811 1
Can't Unmount Volume to Reinstall MacOS I ran Disk Utility to check my computer before updating to the latest Mac OS System. Macintosh HD Data is corrupted. I restarted in Recovery mode to reinstall Ventura, but was unable to do so because the volume could not be unmounted. I also tried to check the volume an repair the volume in Terminal, but that also failed.
2876 5

1 reply

a brody

Level 10

85,245 points

Dec 12, 2022 01:12 PM in response to h20sdavid

if it powers down without input from you, it sounds like the installer forgot to connect the heat sensor.

take it back to them.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

3 Not Mounted in Disk Utility