You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

My MacBook Pro does not connect to Apple ID

My MacBook Pro 13″ Serial Number: FV***V27 Does not connect to Apple ID



[Edited by Moderator] 


MacBook Pro 13″, macOS 12.4

Posted on Jun 23, 2022 2:28 PM

Reply
5 replies

Jun 23, 2022 5:40 PM in response to benyamin60

I reported the serial number in post to the hosts. They have removed it.


Have you tried restarting the computer? Are you running any anti - virus programs? Using a VPN?


Try setting up another admin user account to see if the same problem continues. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. 


Isolating an issue by using another user account 


If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer or by using the developer’s uninstall instructions. For each disable/delete, you will need to restart if you don't do them all at once. 


Safe Mode - About.    


If it works in the Safe Mode, try running this program when booted normally and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read. Click “Share Report” button in the toolbar, select “Copy to Clipboard” and then paste into a reply. This will show what is running on your computer. No personal information is shown. If the log won’t post, try posting it in Pastebin and provide a link in a reply. After pasting the report in a PasteBin page, go to the top of the page, and copy the address in the URL bar. Paste that in a new reply.       Pastebin


https://etrecheck.com



My MacBook Pro does not connect to Apple ID

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.