I could use some help please!

A customer who bought one of my Titles complained that it did not work in the latest version of Final Cut Pro. While that might be possible, I believe that their issues were probably caused by something else, or maybe a case of buyer's remorse.

I cannot upgrade Final Cut Pro beyond what I have installed (10.4.10).

I'm asking for volunteers who can download, install and test the title in Final Cut 11+ and report back here about your experience. You are welcome to keep the title (called "Bottom Up") with my Thanks!

If there is a reported problem, then I have a remade version (that uses a different technique) I'd like to also test.

If you participate (download the template), *please* report your finding here along with the actual version of Final Cut Pro you are using regardless if others report the same information.

Thanks in advance!

The download is on this page:

https://fcpxtemplates.com/sdm_downloads/help-with-fcp-forum-topic-8-31-25/

PS — to enable automatic animation, set the Write Speed to a value **less than** 100%.

Posted on Aug 31, 2025 7:41 PM

Top-ranking reply

Ian R. Brown

Level 7

23,967 points

Posted on Sep 1, 2025 4:00 AM

I have only tested the basic movement of the text starting at the bottom and moving up for every new line and I can confirm that it works using both FCP 11.1 and FCP 11.1.1 on an M2 mini running macOS 15.5 and an M4 running macOS 15.6.1

What stops it working is having the Write On Speed set at a high figure.

Depending on the text I find that somewhere around 50 is OK.

View in context

17 replies

Sep 2, 2025 11:20 AM in response to fox_m

The title is fine as it is. As long as it is accompanied by a brief note saying the Write Speed should be set at a low figure I can't see that anyone would have grounds for complaint.

Sep 3, 2025 12:12 AM in response to fox_m

All my notifications on these forums arrive in the Junk folder!

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

I could use some help please!