Hi all,
I have an audio file that when imported into Logic ipad it clearly shows as a mono file.
Historically I stumbled on a way to ‘change’ the file so it becomes stereo (ie the waveform shows left and right info) But I just can’t recall how I did it…
any help would be greatly appreciated..
[Re-Titled by Moderator]
iPad Pro, iPadOS 18
I am pretty sure you recorded a Mono (1) Signal intro a Stereo (2) track so it is only appearing on one channel.
That or you bounced a file with a hard pan.
Hope this helps,
ThatLogicProGuy
Hi,
First, you might want to try extending the track height vertically as sometimes this can help you visually see the track with stereo info.
Second, to make this Mono appear as a stereo one, you will have to use some kind of doubling effect.
Have you tried "Stereo Spread"?
Remember that a track will can still be Mono even if it appears to be in Stereo if it has the exact same information on the right and left channel? To confirm this, you can use the Multimeter's Goniometer feature.
~ThatLogicProGuy
Hi, thanks for this but doubling is not what I did previously. The conversion ‘trick’ I stumbled on ‘could’ have been in Logic Pro Mac but I recall it having something to do with L/R routing somewhere..
I can tell it’s a mono file as it only plays through one side of my headphones..
u must be looking way to deep as where logic is concerned I’m a VERY basic user…
Just had a thought. When I open the editor window it appears as a stereo image but the wave form is only showing in the top half.. perhaps what I did ‘somehow’ was to convert this to a fully mono signal as it’s a guitar track… thoughts..
I believe you are referring to bouncing interleaved or split. This is done in the Bounce Project window.
Bouncing Interleaved Or Split - Apple Community
~ThatLogicProGuy
DEFINATELY the former!
Am I right in thinking then that what I need to do is convert this stereo file into a mono one…
will the article you provided guide me to do this?
Yes simply split the file and import the correct one.
-ThatLogicProGuy
How to convert a mono audio file to stereo in Logic Pro on iPad?
