no input signal from X32 into Logic Pro

I see the signal on the x32, I'm getting sound from the monitors and speakers however logic isn't getting the guitar signal. I can hear the drummer loops but nothing is getting into logic. All channels on the board are unmuted. Big Sur 11.0.1

Posted on May 4, 2023 09:55 PM

Similar questions

No guitar effects sounds in Logic Pro I just purchased the third generation Focusrite Scarlet solo interface(latest software), using it with logic pro X latest software on my Mac studio. I'm getting guitar signal through the monitor but it's not picking up the effects in logic. not picking up the plug-in sounds just clean guitar coming through.
595 4
No input from usb audio codec I recently got an MacBook Pro 2015 and in bought an audio interface ( Behringer UMC22) , I tried this with different kinds of daws and it worked perfectly! I updated the Mac to Big Sur and I changed out the battery, now if I use Audacity I have perfect input from my guitar using the UMC22 but any other programs like garageband don't show any input. I have set everything like it should, garageband does recognize my interface and I have monitoring set to On.. Still nothing is happening, whatever I do I get no green input signal all. I there anybody who can tell me what else to do/try ? Thanks in advance
2622 7
Suspect LogicPro App corrupt as cannot get Audio sound 2 days ago MacMini Pro M2 with LogicPro v 11.1 would not produce any sound from any Audio Track, except some crackling sounds. Thought to be the Apogee Quartet or its USB cord; but, Arturia MiniFuse 4 does the same. Thought perhaps Godin MultiAc Spectrum SA pickups/electronics; but, a Tacoma Aoustic does the same; and both work on my 2014 iMac Big Sur using MiniFuse 4 or Apogee Quartet. Reinstalled macOS Sonoma 14.7.2, and now get signal all the way to the outputs; but, no signal from top meter to studio monitors. Tried 3 different sets. Used numerous cords for all connections. Exact configuration worked perfectly for years. Now, it must be SW - LogicPro App, or HW - the 2023 MacMini Pro M2 - HW vs SW problem? However, Plug-Ins all work fine and get sound from all using Novation 37 key MIDI keyboard. System alert sounds work fine. This is only LogicPro Audio Track sound output problem, as far as I have determined. There is an update for LogicPro, v 11.1 to 11.1.2. Thinking of Deleting the LogicPro App first; but, can one do this without losing your setup, configurations and other changes that might be kept in contents? Perhaps try the update hoping to fix problem first? If that does ot work, the MacMini Pro M2 is under Warranty until April with Apple Care+. Not looking forward to a Support session, as you rarely get someone knowledgeable with LogicPro. Any suggestion how to proceed before I try an update to 11.1.2? Best, Seth
494 3

2 replies

May 5, 2023 07:17 AM in response to denverdeutsch

USB is connected, input/output in systems pref is XLIVE, restarted computer and board, privacy settings is set to allow micorphone.

tweeks15

Level 1

8 points

Oct 26, 2023 06:35 AM in response to denverdeutsch

same here, did you find a solution?

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

no input signal from X32 into Logic Pro