You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

How to erase everything and do a clean install

I have a bootable monterey disc but I notice the hard drive is divided into an OS volume and a data volume. When I erase the disc in disc utility do I erase both? After that, I just boot to the thumb drive and install monterey? It's been a while since I did this. Thanks. (I plan to do this on two intel macs, a 2015 27" intel Imac and a 2019 Macbook Pro. Both are currently running Catalina).

iMac 27″, macOS 10.15

Posted on Sep 23, 2022 10:58 AM

Reply
Question marked as Top-ranking reply

Posted on Sep 24, 2022 2:37 AM

" Scorched Earth Method "


This method will WIPE ALL Data and there is No Recovery - Period.


>> Only works on Intel Based Apple Computer <<


1 - Shutdown computer and disconnect all external drive Except the newly created Bootable Installer.


2- Restart and immediately hold the OPTION key until the Startup Manager appears and choose the USB Drive. 


3 - It will present options >> Disk Utilities >> View >> View ALL attached Drives. 


4 - Choose the Upper Most Drive ( not the volumes indented and list below ).


5 - The drive normally is called Apple Media or Apple SSD - that is the drive to Erase and format as APFS with the GUID Partition Map. This applies to macOS 10.14 Mojave and above


6 - Once that is done >> backup out of Disk Utilities and choose install macOS. 


7 - Follow the prompts and it may automatically reboot several time. 


8 - Upon a final reboot - Setup Assist will present with the newer version of macOS.

4 replies
Question marked as Top-ranking reply

Sep 24, 2022 2:37 AM in response to marby

" Scorched Earth Method "


This method will WIPE ALL Data and there is No Recovery - Period.


>> Only works on Intel Based Apple Computer <<


1 - Shutdown computer and disconnect all external drive Except the newly created Bootable Installer.


2- Restart and immediately hold the OPTION key until the Startup Manager appears and choose the USB Drive. 


3 - It will present options >> Disk Utilities >> View >> View ALL attached Drives. 


4 - Choose the Upper Most Drive ( not the volumes indented and list below ).


5 - The drive normally is called Apple Media or Apple SSD - that is the drive to Erase and format as APFS with the GUID Partition Map. This applies to macOS 10.14 Mojave and above


6 - Once that is done >> backup out of Disk Utilities and choose install macOS. 


7 - Follow the prompts and it may automatically reboot several time. 


8 - Upon a final reboot - Setup Assist will present with the newer version of macOS.

How to erase everything and do a clean install

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.