You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Can I use an Ethernet cable to connect my old Mac to Mac new Mac using Migration Assistant. Or should I use Wi-Fi?

Can I use an Ethernet cable to connect my old Mac to new Mac using Migration Assistant. Or should I use Wi-Fi?

MacBook Pro 15″, macOS 12.6

Posted on Sep 12, 2022 9:05 PM

Reply
6 replies

Sep 12, 2022 9:37 PM in response to Gary645

It should work, as ethernet adapters are pretty standard devices that should have built-in device drivers ready. I don't believe it really matters as it just needs a network connection, which can be a combination or Wi-Fi and wired ethernet. For example, I've got a networked printer/scanner and its only network connection is wired ethernet (no built-in Wi-Fi if you can believe it). But I access it with Wi-Fi on the same network, and the computers communicate with the printer just fine even though they're connected to the network wirelessly.

Sep 13, 2022 9:58 AM in response to Antonio Rocco

Antonio Rocco wrote:
You don’t need to use a crossover cable. The macs will do the link adjustment automatically. Straight through cable is all that’s needed. If using Wi-do get as close to the router as comfortably possible, ie: be in the same room.


It's not needed if they're native Mac ethernet ports. I did it for a late-2007 (Santa Rosa) MacBook to a mid-2012 (Ivy Bridge Unibody) MacBook Pro. It was pretty painless although it was using 100 Base-T from the slower port. Not sure how it would work if one is using an ethernet to USB adapter though.


However, I'm thinking that using a wired router makes it easier, in addition to being able to go wired to Wi-Fi.

Sep 13, 2022 10:09 AM in response to Gary645

Once you can connect each computer to the Internet without re-cabling, you have established a pathway that can be used for this Migration. A mix of Wi-Fi and Ethernet connections can be used, but most Wi-Fi connections are slower.


The most trouble-free way to use Ethernet cabling for this migration is to connect BOTH devices to your Router with Ethernet cables, even if you have to carry one or both over next to your Router.


The connection through your Router will be a local connection (through the Switch portion of the Router) not actually using the Internet-connected portion of your Router. But setup is much easier when the Router sits in the middle and supervises.

Can I use an Ethernet cable to connect my old Mac to Mac new Mac using Migration Assistant. Or should I use Wi-Fi?

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.