You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

2017 iMac incessant spinning beach balls after Catalina upgrade

Hi,


I just upgrade my 21.5 2017 iMac to Catalina. Once it was upgraded, it seemed to slow to a crawl with spinning beach ball for almost every click I made.


So I erased the hard drive and started all over again and decided to transfer items from back ups one at a time to see if something specific was causing the slow downs.


After installing Catalina on the newly erased hard drive and logging into iCloud (which downloaded everything I had stored in iCloud back ups), I am still getting hang ups.


It's been 48 hours so I would suspect that any slow downs from spotlight indexing would have been resolved if that was the cause of the slow downs.


I would not expect this behavior from less than 3 year old Mac. Any suggestions?


Thanks.


iMac 21.5" 4K, macOS 10.15

Posted on Apr 26, 2020 9:43 AM

Reply
Question marked as Top-ranking reply

Posted on Apr 26, 2020 11:22 AM

A Troubleshooting Procedure that may Fix Problems with macOS El Capitan or Later


You should try each, one at a time, then test to see if the problem is fixed before going on to the next.


    Be sure to backup your files before proceeding if possible.


  1. Shutdown the computer, wait 30 seconds, restart the computer.
  2. Disconnect all third-party peripherals.
  3. Resetting your Mac's PRAM and NVRAM
  4. Reset the System Management Controller (SMC)
  5. Reset your Startup Disk and Sound preferences, if needed, after resetting the PRAM.
  6. Test in safe mode to see if the problem persists, then restart normally.  Use safe mode to isolate issues with your Mac and Playing Safe - what does Safe mode do?
  7. Repair the disk by booting from the Recovery HD. Immediately after the chime hold down the Command and R keys until the Utility Menu appears. Choose Disk Utility and click on the Continue button. Select the indented (usually, Macintosh HD) volume entry from the side list.  Click on the First Aid button in the toolbar. Wait for the Done button to appear. Quit Disk Utility and return to the Utility Menu. Restart the computer from the Apple Menu.
  8. Repair permissions on the Home folderResolve issues caused by changing the permissions of items in your home folder.
  9. Create a New User Account Open Users & Groups preferences. Click on the lock icon and enter your Admin password when prompted. On the left under Current User click on the Add [+] button under Login Options. Setup a new Admin user account. Upon completion log out of your current account then log into the new account. If your problems cease, then consider switching to the new account and transferring your files to it - Transferring files from one User Account to another.
  10. Download and Install the macOS Catalina 10.15.4 Combo Update.
  11. Reinstall OS X by booting from the Recovery HD using the Command and R keys. When the Utility Menu appears select Install OS X then click on the Continue button.
  12. Erase and Install OS X Restart the computer. Immediately after the chime hold down the Command and R keys until the Apple logo appears. When the Utility Menu appears:


     1. Select Disk Utility from the Utility Menu and click on the Continue button.

     2. When Disk Utility loads select the drive (out-dented entry) from the Device list.

     3. Click on the Erase button in Disk Utility's toolbar. A panel will drop down.

     4. Set the Format type to APFS (for SSDs only) or Mac OS Extended (Journaled.)

     5. Click on the Apply button, then wait for the Done button to activate and click on it.

     6. Quit Disk Utility and return to the Utility Menu.

     7. Select Install OS X and click on the Continue button.


Similar questions

5 replies
Question marked as Top-ranking reply

Apr 26, 2020 11:22 AM in response to francois241

A Troubleshooting Procedure that may Fix Problems with macOS El Capitan or Later


You should try each, one at a time, then test to see if the problem is fixed before going on to the next.


    Be sure to backup your files before proceeding if possible.


  1. Shutdown the computer, wait 30 seconds, restart the computer.
  2. Disconnect all third-party peripherals.
  3. Resetting your Mac's PRAM and NVRAM
  4. Reset the System Management Controller (SMC)
  5. Reset your Startup Disk and Sound preferences, if needed, after resetting the PRAM.
  6. Test in safe mode to see if the problem persists, then restart normally.  Use safe mode to isolate issues with your Mac and Playing Safe - what does Safe mode do?
  7. Repair the disk by booting from the Recovery HD. Immediately after the chime hold down the Command and R keys until the Utility Menu appears. Choose Disk Utility and click on the Continue button. Select the indented (usually, Macintosh HD) volume entry from the side list.  Click on the First Aid button in the toolbar. Wait for the Done button to appear. Quit Disk Utility and return to the Utility Menu. Restart the computer from the Apple Menu.
  8. Repair permissions on the Home folderResolve issues caused by changing the permissions of items in your home folder.
  9. Create a New User Account Open Users & Groups preferences. Click on the lock icon and enter your Admin password when prompted. On the left under Current User click on the Add [+] button under Login Options. Setup a new Admin user account. Upon completion log out of your current account then log into the new account. If your problems cease, then consider switching to the new account and transferring your files to it - Transferring files from one User Account to another.
  10. Download and Install the macOS Catalina 10.15.4 Combo Update.
  11. Reinstall OS X by booting from the Recovery HD using the Command and R keys. When the Utility Menu appears select Install OS X then click on the Continue button.
  12. Erase and Install OS X Restart the computer. Immediately after the chime hold down the Command and R keys until the Apple logo appears. When the Utility Menu appears:


     1. Select Disk Utility from the Utility Menu and click on the Continue button.

     2. When Disk Utility loads select the drive (out-dented entry) from the Device list.

     3. Click on the Erase button in Disk Utility's toolbar. A panel will drop down.

     4. Set the Format type to APFS (for SSDs only) or Mac OS Extended (Journaled.)

     5. Click on the Apply button, then wait for the Done button to activate and click on it.

     6. Quit Disk Utility and return to the Utility Menu.

     7. Select Install OS X and click on the Continue button.


2017 iMac incessant spinning beach balls after Catalina upgrade

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.