Mac Studio M2 Max high pitched noise pulsing

I've seen some complaints here about the high-pitched noise in the Mac Studio models. I've recorded and visualised it (see below): the blue sharp narrow "wave" at around 4kHz is really getting annoying. Must definitely come from the power unit considering there are no other moving parts or parts handling high voltage inside Mac Studio.


Any solutions or ideas?


Mac Studio, macOS 14.7

Posted on Dec 10, 2024 01:17 AM

Reply

Similar questions

5 replies

Dec 11, 2024 06:50 AM in response to milesfromrheinstetten

Early after the release of the Mac Studio, Readers tried to blame the noise (that turned out to be the whistling noise) on Coil Whine. That is NOT a "known issue" on these Macs. But that could possibly be an issue on certain samples of the product. Each case would have to be evaluated separately.


Coil whine can occur when the wires in wire-would coils vibrate freely. Apple's solution might be to replace the power supply board. The home-made solution is to put some clear silicon-sealer (rubbery and non-conductive when cured) in-between the wires of the coil to damp out the vibration.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Mac Studio M2 Max high pitched noise pulsing

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.