You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

MacBook Pro 2017 – Startup Problem (2)

This is an update to a previous post of mine that no longer applies. I'd like some suggestions as to what might be causing this problem.


After several hundred boots over the last two weeks, this machine still won't start reliably. It has a new install of Ventura; PRAM and SMC have been reset now and again; but sometimes it starts, sometimes it doesn't.


The latest hiccup went like this. Machine was turned on and functioning with power connected. Closed all open software, shutdown, closed lid. Several hours later, I lifted the lid. Nothing happened. Closed lid, waited a minute, and lifted. Nothing. Repeated a few times. Nothing.


So I tried the cold treatment (room temperature at the time was about 20ºC). Disconnected power, put the laptop in the fridge for 5 minutes, opened lid (without power connected) and it booted. Talk about exasperating!


What could the problem be? Anything to do with disconnecting the power? Loose wiring somewhere? Faulty "Open lid" switch?


This is more of a theoretical exercise than anything else. I really want to find out what could be causing this. I don't need the laptop. It was given to me and I'd like to see it working. But, if it plays up too many more times, I'll eBay it for "Spare Parts".


Posted on Nov 20, 2024 5:02 AM

Reply
4 replies

Nov 21, 2024 6:44 PM in response to HWTech

Thanks for the detailed response, HWTech. I'll copy those ideas and put them in my laptop document.


I've erased the SSD and reinstalled Ventura, with not additional software this time (as per one of your questions). A few blips for the first several starts, and the internet didn't like to make connection, but now it seems to have settled down. I'll do several starts each day for the next week or so, before adding software listed below, and if it plays up again – eBay!


  1. The MacBook Pro is a 13" non-touchbar.
  2. Clean install was done over an erased SSD, then several apps installed.
  3. Battery level is showing at 100%. The laptop was only used about 20 times a year for a few hours each time to show images at the club, always with power connected.


Ques

Is it possible that third party software can cause startup to not work? With all this "signed" stuff for the protected operating system, I don't understand how that can happen.


I only intend adding three bits of software:


  • Menu Meters (so I can see speeds in the Menu Bar). I've been using this for about a dozen years for Mavericks. It works under Ventura, but maybe it's causing problems. Does Ventura offer that type of thing within itself?
  • Keynote
  • Firefox

Nov 20, 2024 11:54 AM in response to Guy Burns

These USB-C Intel Mac laptop have some quirks. An occasional issue like this happed from time to time. If it happens a lot, then that indicates a problem.


Did you perform a clean install of macOS by first erasing the whole physical SSD followed by installing macOS?


Did you test that configuration before installing any third party software or restoring from a backup?


What is the battery condition according to macOS?


FYI, to make sure these recent Macs are completely powered off, I like to press the Caps Lock key before selecting Shutdown. When the Caps Lock LED goes dark the laptop should be completely powered off (or asleep if Sleep was selected).



Guy Burns wrote:

After several hundred boots over the last two weeks, this machine still won't start reliably. It has a new install of Ventura; PRAM and SMC have been reset now and again; but sometimes it starts, sometimes it doesn't.

The latest hiccup went like this. Machine was turned on and functioning with power connected. Closed all open software, shutdown, closed lid. Several hours later, I lifted the lid. Nothing happened. Closed lid, waited a minute, and lifted. Nothing. Repeated a few times. Nothing.

Connecting the power adapter would be advised. You should hear the "ding" within a minute or two if the unit is receiving power, although I have seen a few systems where it took 15 minutes before I heard the "ding" & the laptop powered up. Also try each USB-C port especially on the other side of the laptop.


If the power adapter is already connected, then disconnecting the charging cable & reconnecting the charging cable can be enough to trigger a system power on.


So I tried the cold treatment (room temperature at the time was about 20ºC). Disconnected power, put the laptop in the fridge for 5 minutes, opened lid (without power connected) and it booted. Talk about exasperating!

Absolutely no reason to do this. If anything you will make things worse. If the laptop powers on then you have a much larger temperature differential on the electronic components which heat up rapidly so you are introducing thermal stress on the physical hardware since some items will physically expand faster than others causing stress fractures. Plus there is a potential of introducing liquid into the laptop through condensation.


What could the problem be? Anything to do with disconnecting the power? Loose wiring somewhere? Faulty "Open lid" switch?

All are certainly possible (loose wiring not so much except for the battery flex cable). The sleep sensor is a magnetic sensors which typically doesn't fail unless damaged by liquid. Only the 2019+ models have changed to a worse solution involving an unpredictable Lid Angle Sensor that seems much more prone to issues.


There are a lot of possibilities with the 2017 models including a bad internal display cable that has a high rate of failure. The USB-C ports on this model are also known to wear prematurely resulting in loose connections with USB-C cables. I also suspect an unknown hardware issue with the Logic Board which ends up losing the connection to the battery which ends up showing the battery icon to indicate needing to connect the power adapter.


You neglected to specify the exact model.....15" or 13", Touchbar or non-Touchbar.


@kaz-k's guess is a very good place to start. However, I have seen lots of battery failures where the Battery Condition is still "Normal" and the Apple Diagnostics pass. Age does play a big part in the health of the battery. Plus some of the non-Touchbar model has a known battery issue as Apple at one time had a free battery repair program for it (now expired).

Nov 21, 2024 8:32 PM in response to Guy Burns

Guy Burns wrote:

1. The MacBook Pro is a 13" non-touchbar.

Ouch, I was afraid of that. While all of the 2017 models had issues, this one had all their issues, plus even some more with the SSD, Battery, and having theUSB-C ports integrated into the Logic Board. Unfortunately there is no way to know if this laptop was one which had the bad battery. Apple never released specific details on what system serial number ranges were impacted by the battery issue. Apple only had the user check their system serial number to see if it may have been within that range. Unfortunately that free repair program has expired so that Apple article & check no longer exist.


3. Battery level is showing at 100%. The laptop was only used about 20 times a year for a few hours each time to show images at the club, always with power connected.

That type of use could easily have caused damage to the battery. If the previous owner let the battery drain to zero while it was being stored/unused, then that will easily damage the battery.


Ques
Is it possible that third party software can cause startup to not work? With all this "signed" stuff for the protected operating system, I don't understand how that can happen.

I doubt third party software would cause a power on issue, although there is a small possibility if it modified a PRAM setting it could somehow cause a problem. A boot issue yes, power on issue probably not.


The signed software & known developers gives people a false sense of security in that it makes it seem the developers are doing a good job programming & not doing anything nefarious. That isn't really true. The signed aspect just means that the app is just how the developer made it (either good or bad) and by the time you install it the app is still the same. Plus if you don't get any notices while launching the app, it means the app hasn't been modified while it has been on your system.


I think it takes a lot to have a developer lose their status as a "known developer" allowed to sign & distribute their software by Apple or to release it in the App Store.


A hardware issue of some sort seems the most likely, but testing with a clean install is the best way to confirm. Figuring out which part of the hardware is causing a problem is another matter. The Battery is a definite possibility due to its age & how the laptop was only intermittently used. Plus knowing that some of those systems had a known issue with the battery makes it even more likely.


Other possible hardware issues:


Bad USB-C ports. Because these ports have dual use for data transfers & supplying power to the laptop, they tend to be more susceptible to hardware failures due to faulty external devices. Plus I find these USB-C ports tend to attract a lot of accidental liquid damage. It only takes one small drop of liquid to enter the port to damage it so even just a splash of liquid from a couple feet away could possibly make it inside the port. I see this so often, that I always examine these ports first even if the client doesn't mention any issues. Unfortunately an external examination by looking into the port is not enough to be 100% sure the contacts are clean & healthy.


Bad Logic Board. Sometimes people connect cheap devices and these can damage the USB & power controller on the Logic Board. Each port has their own chips. However, due to how Apple wired these circuits, sometimes if one port is damaged, it will affect the other ports as well. Liquid damage to the Logic Board is another possibility since there is nothing preventing liquid spilt/splashed on the keyboard from seeping through & onto the Logic Board.


In my previous post I mentioned I suspect a hardware issue with all of these Apple USB-C Intel Logic Boards. In fact many times just performing an SMC Reset will stop the laptop from powering on. I've had to connect & disconnect the power adapter to try to trigger an auto power on, while other times I had to disconnect the battery in order to reset the system to allow it to power on again. However, I've never seen a laptop with chronic power on issues, just intermittent ones.


The battery on these Intel USB-C model laptops have two connections to the Logic Board. One is a large screw and another is a flex cable. The flex cable slides into a connector on the Logic Board with a very fragile locking lever to hold the cable in place. Some models have another connector on the battery board as well. It is possible that one of these connections could have caused the flex cable to get out of position. This latching lever is extremely delicate and very easily damaged even when being careful. Many times just closing the latching lever can cause it to twist & slide off the connector....reinstalling it is nearly impossible if the lever comes apart from the connector.


MacBook Pro 2017 – Startup Problem (2)

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.