Connecting the Roland Fantom 06 to MacOS Sonoma 14.6.1 via USB

Connecting the Roland Fantom 06 to MacOS Sonoma 14.6.1 via USB.



if you have downloaded the latest Roland Driver for the Roland Fantom 06 Keyboard and you are still having problems with it not connecting then please read below. It worked for me.

Connecting your FANTOM to a computer using the direct USB connection

On the FANTOM 06, press the MENU button.

Touch "SYSTEM" on the touch screen.

Use the left knob under the screen to select the "GENERAL" tab on the left side of the screen.

Touch "USB Driver" on the screen and use the dial to set this to "VENDOR."

Press the WRITE button to save this setting, then power off and back on the FANTOM.

Download and install the FANTOM USB driver for your computer.

You can download the latest drivers from the Roland website here.

Make sure you download the driver that corresponds to the type of computer

you have (Mac or Windows-based) and the version of operating system you

are using. Once downloaded, you will need to run the setup application

to install the driver into your system. This may include re-starting

your computer.