After Sequoia 15.0 update my ScanSnap ix1600 cannot connect wireless

Eg0n_ro wrote:

Hi all,

Since I update to ios Sequoia 15.0 my scansnap ix1600 cannot connect wireless anymore and i cannot find any solutions.

I can connect it only by USB but otherwise nothing works.

If i try to connect it by wi-fi it says "Failure to establish a network communication between the ScanSnap and the computer occured".

Just to specify the scansnap and my mac are connected to the same wi-fi and before the IOS update everything was fine....

Is anyone else went through this problem and have a solution ? please help

Have you reached out to Ricoh Customer Support

https://www.pfu.ricoh.com/global/scanners/scansnap/dl/

I also had the same issue - no wireless connection from my Fujitsu ScanSnap iX1600 to my iMac. Tried the above solution (https://scansnap-faq.pfu.ricoh.com/hc/en-us/articles/38377796005785-ScanSnap-Home-does-not-work-properly-macOS-Sequoia-15), rebooted the iMac and it worked perfectly. Hope this helps!

I had the same problem. Try this. It worked for me. Good luck! https://scansnap-faq.pfu.ricoh.com/hc/en-us/articles/38377796005785-ScanSnap-Home-does-not-work-properly-macOS-Sequoia-15

I had the same problem and then stumbled upon this: https://scansnap-faq.pfu.ricoh.com/hc/en-us/articles/38377796005785-ScanSnap-Home-does-not-work-properly-macOS-Sequoia-15

Hope it helps!

See if VueScan has the same problem?

https://www.hamrick.com/vuescan/fujitsu_scansnap_ix1600.html

Excellent! :) 👍

👍