Audio not working boot camp windows 10

I have an Apple iMac Retina 5K 27" (Late 2015) and bootcamped it to windows 10 but when I try to watch videos there is no audio. The audio is “High Definition Audio Device Digital Audio (S/PDIF)” or something alongs the line of that. I tried every YouTube video I saw and nothing worked :/

Posted on Aug 8, 2023 08:32 AM

Similar questions

Audio driver issue? I have a 2015 Macbook Air with bootcamp booting Windows 10 alongside Mac OS Monterey. If I boot into Mac OS, then reboot into Windows 10, audio works fine (Windows shows the audio device "Cirrus Logic CS4208 (AB 126)"). If I then reboot back into Windows 10, the audio no longer works, and Windows shows the audio device "Cirrus Logic CDB4208." Audio always works in MacOS. I have tried to reinstall the CS4208 driver, but it will not install and gives me a message along the lines of "you already have the latest driver." Any advice? Thanks in advance.
437 1
NO AUDIO ON WINDOWS 10 i Recently downloaded windows 10 on my imac mid 2011 and I installed all the drivers using bootcamp but i can solve the problem that i don't receive sound output from imac.
3455 4
Firewire Audio on Monterey 12.6 Good afternoon, I recently upgraded my imac to Big Sur the latest version available. i immediately encountered problems with my firewire sound card. While up to Catalina 10.15.7 everything always worked perfectly, upgrading the upgrade to big sur has created quite a few problems, i.e. the audio interface is recognized regularly but no sound comes out playing an mp3 or video from youtube. Its control panel works perfectly, it hooks the sound card, it is synchronized, every command on the software control panel interacts with the hardware. When playing videro on youtube or an mp3 visually there is no activity on the indicators in the mixer panel. The sound card is recognized by Big Sur correctly and everything configured as it should. The sound card is connected via firewire 400/400 cable fully functional and already tried to replace. I read on the internet that there have been several cases with this problem and that it would seem that from Big Sur to Monterey, Apple has decided to drop functions from firewire until its final funeral with ventura. This technology, considered obsolete by Apple but still very effective, leads Apple to make a radical choice without regard for its customers and the many recording studios around the world who find themselves forcibly changing hundreds of thousands of dollars in recent hardware. I hope this is a hoax, because it would sound absurd as a choice. Anyway, I ask you what I can do to get my sound card (Focusrite Liquid 56) to work on my Mac as it did with Catalina. I point out that I have contacted Focusrite support. To their knowledge my sound card is working and compatible with the latest driver up to Monterey. No adapters are needed but the firewire connection is. The sound card tested on Windows works perfectly.
1969 4

1 reply

Grababana

Level 2

152 points

Aug 11, 2023 08:06 AM in response to yousif168

Hey there!

Bootcamp on Apple iMacs, especially older ones, is generally quite unstable, and numerous bugs and glitches can arise whilst running Windows. Usually re-installing Windows will fix the problem. Make sure you have adequate storage installed on Windows so it can run properly.

Certain Windows versions are buggier than others, so I recommend always installing "Windows 10 Home", as that is usually the most stable.

I hope this helps!

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Audio not working boot camp windows 10

Welcome to Apple Support Community

A forum where Apple customers help each other with their products. Get started with your Apple Account.

Learn more Sign up