You can make a difference in the Apple Support Community!
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
Brand new MacBook Air running the latest operating system. older windows laptop. Both on same high speed network. and yet migration assistant hangs up claiming it is trying to reconnect to my windows PC. I have been trying for three days to get my macbook up and running with my files. This is a terrible experience as a new apple user.
Hi there!
If you're having issues migrating your data, I'd recommend you explore the "If the transfer isn't successful" section of the Transfer from PC to Mac with Migration Assistant - Apple Support article:
If you installed antivirus software, firewall software, or VPN software on your Mac or PC, turn off that software before using Migration Assistant.
You can also use the check disk (chkdsk) utility on your PC to check for issues that might prevent successful migration of your data:
1. Right-click the Start button, then click Run.
2. Type cmd and press Enter. Command Prompt opens.
3. At the prompt, type chkdsk and press Enter.
4. If the utility finds problems, type chkdsk drive: /F, where drive is the letter representing your Windows startup disk, such as C.
5. Press Enter.
6. At the prompt, type Y, then restart your PC.
7. Repeat this process until the check disk utility reports no issues. If the utility can't fix every issue that it found, you might need to have your PC serviced.
Or use an external storage device or file sharing to copy important data from your PC to your Mac.
- Jack
Hi there!
If you're having issues migrating your data, I'd recommend you explore the "If the transfer isn't successful" section of the Transfer from PC to Mac with Migration Assistant - Apple Support article:
If you installed antivirus software, firewall software, or VPN software on your Mac or PC, turn off that software before using Migration Assistant.
You can also use the check disk (chkdsk) utility on your PC to check for issues that might prevent successful migration of your data:
1. Right-click the Start button, then click Run.
2. Type cmd and press Enter. Command Prompt opens.
3. At the prompt, type chkdsk and press Enter.
4. If the utility finds problems, type chkdsk drive: /F, where drive is the letter representing your Windows startup disk, such as C.
5. Press Enter.
6. At the prompt, type Y, then restart your PC.
7. Repeat this process until the check disk utility reports no issues. If the utility can't fix every issue that it found, you might need to have your PC serviced.
Or use an external storage device or file sharing to copy important data from your PC to your Mac.
- Jack
thanks! I think I will resort to using a hard drive to transfer files. I am pretty sure I had turned off anti virus and firewall stuff.
migration assistant repeatedly hangs when transferring from Windows to Macbook
