Roland Fantom 6 and MAINSTAGE Midi Program Change.

Question

stefpiano Author

Level 1

4 points

Roland Fantom 6 and MAINSTAGE Midi Program Change.

Hi,

my Roland Fantom 6 can't change mainstage patches via USB cable for Mainstage version 3.6.3. on Ventura.

Work well with older version of mainstage 3 or work well with USB MIDI interface EMU.

The fantom send correctly the MSB LSB PC midi messages and He's reconized by Midi Studio on OsX.

Mainstage recognize note, control, etc ... but not the Program Changes.

I tried with Vendor and Generic usb driver in fantom 6. Same issue

Need Help.

MacBook Pro 13″, macOS 13.2

Posted on Jul 26, 2023 04:39 PM

Reply

Answer 1

stefpiano Author

Level 1

4 points

Jul 27, 2023 08:30 AM in response to tfromtroon

I checked with Midi Monitor: the same messages from a midi interface change program on Mainstage.

17:25:33.731	From E-MU XMidi1X1    	Control	1	0	0
17:25:33.739	From E-MU XMidi1X1      Control	1	32	0
17:25:33.739	From E-MU XMidi1X1      Program	1	1

But then I changed the device to fantom 6, nothing happened


17:27:35.298	From FANTOM-6 7 8	Control	1	0	0
17:27:35.309	From FANTOM-6 7 8	Control	1	32	0
17:27:35.309	From FANTOM-6 7 8	Program	1	1

tfromtroon wrote:

Try MIDI Monitor; it's free from snoize dot com. It will show what exactly is coming in from the Roland. Have you another controller that can send PC messages to try to track down the issue?

Reply

Answer 2

Jul 29, 2023 08:54 AM in response to tfromtroon

I see.

In "Edit" mode (in MS3), select your concert from the patch list on the left and in the Concert Settings pane, select MIID. Is the Fantom and channel 1 selected in the "Program Changes" section?

Reply

Answer 3

Jul 27, 2023 07:50 AM in response to stefpiano

Try MIDI Monitor; it's free from snoize dot com. It will show what exactly is coming in from the Roland. Have you another controller that can send PC messages to try to track down the issue?

Reply

Answer 4

Jul 28, 2023 05:44 AM in response to stefpiano

What is the significance of the 7 and 8 digits in black after the Fantom ID?

Reply

Answer 5

stefpiano Author

Level 1

4 points

Jul 29, 2023 07:20 AM in response to tfromtroon

Nothing important, Only the model of fantom (fantom6 , fantom7, fantom8)

Best

Reply

Roland Fantom 6 and MAINSTAGE Midi Program Change.

Similar questions