Link to Brother printer

Hi,

The exact Brother printer model would help. Please post back.

If it is an AirPrint printer connected to a network, you may want to try a power cycle sequence (do not forget the router):

Power off the Wi-Fi router, the printer, the Mac, and all iPhones/iPads/other computers or devices. Wait two to three minutes. Power on the router. Wait two to three minutes. Power on the printer. Wait a minute or two. Power on the Mac. Finally, power on any iPhones/iPads/other computers or devices.

Reset the printing system on your Mac to solve a problem – Apple Support (UK)

Add a printer to your printer list so you can use it on Mac – Apple Support (UK)

DCP-L2530DW?

General: Solve printing problems on Mac - Apple Support

Probably where this is headed: Reset the printing system on your Mac to solve a problem - Apple Support

Load the latest firmware, too:

https://support.brother.com/g/b/downloadlist.aspx?c=eu_ot&lang=en&prod=dcpl2530dw_eu&os=135

Thank you for the information

The Brother DCP-L2530DW is listed as a model supporting Apple's AirPrint technology, so no additional software/driver should be needed, provided that the printer is connected to the same network (Wi-Fi router) as the Mac and the iPhone.

Since you can print from the iPhone, try the full power cycle sequence outlined in my previous message.

Making sure that the latest printer firmware is installed, as suggested by MrHoffman, is a good idea as well.

Printing on my Brother HL-L2350DW not working in Ventura either, at least when using Apple print system.

I have deleted and re-added the printer.

The printer is AirPrint compatible.

The printer is visible on the network.

It frequently prints the first page then stops, saying 'Unable to add document to print job' in the 'Brother HL-L2350DW series' app, and logging that same message in the error log.

Printing *does work* from Brother's iPrint & Scan application. Note that Brother's app does not seem to use CUPS.

So: it's not the network; it's not the printer itself; it's not a corrupted printer settings system; from other reports it is only a problem on macOS, not iOS; it has only started happening in Ventura, and systems outside those released by Apple (e.g. Brother) still work.

Brother recommends AirPrint, but yes, the driver is an option.

I would confirm that the firmware is current with that printer. There is a firmware update from earlier this year.

https://support.brother.com/g/b/downloadlist.aspx?c=us&lang=en&prod=hll2350dw_us_eu_as&os=10077

There's no driver from Brother and the firmware is up to date.

I will create a new issue rather than rely on this solved one.

I had the same problem with a Brother mfc-l6800dw and changing the IPv6 setting on the printer from off to on made it all work.