Mac Studio Max with Apple A1407 display

Question

Level 1

11 points

Mac Studio Max with Apple A1407 display

Hi,

New Mac Studio Max (Monterey 12.6.3) > Apple Thunderbolt A1407 display worked fine for two days then on a fine Friday morning the display did not awake – luckily I did after some coffee. After a lot of tries checking TB 2 to 3 adapters (working with my UA Apollo Twin Mk II) Thunderbolt) and also connecting the display to an old MacBook Pro 2011.

The A1407 did not show up on the System report. I’ll try the Display Link Manager next… any help or suggestions is much appreciated – as I’m on a really tight budget and getting the Mac Studio did not help… and btw the usb-ports on the display works, just tried charging my old iPhone..

Mac Studio, macOS 12.6

Posted on Mar 7, 2023 2:54 AM

Reply

Answer 1

⚠️

Top-ranking reply

tbirdvet

Level 6

16,157 points

Mar 16, 2023 5:51 AM in response to DoFuzz

You bypass the octopus (built in ) cable by connecting a TB2 cable to one of the TB ports on the display. The other end connect to the TB2 to TB3 adapter and connect to your Mac. You do not need to use the built in cable to use this display.

Reply

Answer 2

DoFuzz Author

Level 1

11 points

Mar 10, 2023 1:25 AM in response to DoFuzz

Hi

thx to both of you for the replies:

• Energy saver on 15 mins.

• Using the Apple TB 2 <> TB 3 adapter - two TB adapters working with UA Apollo Twin Mk II sound card.

Any more suggestions and ideas appreciated.

Reply

Answer 3

DoFuzz Author

Level 1

11 points

Mar 16, 2023 2:51 AM in response to tbirdvet

Hi

@tbirdvet - I'm not a 100 % sure what you refer to? Are you suggesting that I connect a working Thunderbolt 1/2 cable on the back of the display (plus TB 2 <> TB 3 adapter) to the Mac Studio?

@hcsitas - I do have another monitor but would like to get the Apple display working if possible.... the extra usb-ports would help immensely...

Again thx to both of you for the suggested solutions and info... appreciated!

Reply

Answer 4

DoFuzz Author

Level 1

11 points

Mar 17, 2023 1:08 AM in response to tbirdvet

Hi

@tbirdvet - My bad, I've seen so many refer to iFixit.com so I only thought of opening up the display (something I just cannot do, I know my way around guitars and other instruments but displays, that's a no, no). So I tried connecting a TB cable and the TB 2 <> 3 adapter and hey presto - it seems to work now (touch wood)!

Thanks a million!

Thanks to both of you for taking the time to give info and your suggestions.

Cheers!

Reply

Answer 5

hcsitas

Level 6

13,952 points

Mar 10, 2023 1:26 AM in response to DoFuzz

Use these settings

Reply

Answer 6

hcsitas

Level 6

13,952 points

Mar 7, 2023 4:29 AM in response to DoFuzz

What version OS? Is Sleep disabled? Post snaps of your Energy Saver settings please.

Reply

Answer 7

tbirdvet

Level 6

16,157 points

Mar 7, 2023 4:46 PM in response to DoFuzz

Octopus cable could have failed. Try a TB cable connected directly to the TB port on the display.

Reply

Answer 8

DoFuzz Author

Level 1

11 points

Mar 12, 2023 1:09 AM in response to hcsitas

HI hcsitas,

again thx for the info and screen shot - but the big problem as hinted at above - the display is

black, I cannot start up in Safe Mode but the usb-ports can share my old iPhone.

Cheers

Reply

Answer 9

hcsitas

Level 6

13,952 points

Mar 12, 2023 1:11 AM in response to DoFuzz

“luckily I did after some coffee.” - try a refill😁, otherwise set with another monitor.

Reply

Answer 10

DoFuzz Author

Level 1

11 points

Mar 14, 2023 4:30 AM in response to hcsitas

;-)... well the strange thing is that the display did work for two days... so there must be some way to get it to work again - so any tips, info or leads much appreciated.