Noticeable Audio Cut When Using Multicam

For the separate synced audio angle in the multicam, it's one continuous clip and the audio effect is applied to this synced audio clip? What audio effect is being applied? And when you switch between video angles (video only edits), you hear fades at each of these video angle cut points?

Can you post screenshots of the multicam editor, clip viewer and project timeline?

That's a good workaround from Tom.

So, just to be sure, you have an audio effect that's applied to the Audio angle *inside* the multicam? No audio effects applied at the higher project level? I tried to replicate this with a heavy compressor effect on the audio angle, then did video-only edits of the multicam in a project and could not hear any changes at the edit points.

Then you have to do or more careful. Detach the first shot, stretch it out to where there is an audio cut. Detach the audio for the next shot and stretch it out to the next cut.

Basically when working with this type of multicam where you want to cut the video work with detached audio and use Shift-Cmd-B where you need to cut sections of both video and audio.

Detach the audio from the clip in the project so when you cut the picture the audio isn't cut.

So the audio is the same on all the shots. Detach the audio from all the clips. Delete all the audio except for the first shot. Drag out the audio from the first shoot for the length of the video.

I'm not sure if this will help in your situation but have you looked at using roles and adding effects at a compound clip level?

Example from Travis at Ripple.

https://youtu.be/h4XchWCEFwg