Screen record with sound

How to screen record with sound ? I’ve seen videos online beign screen recorded on MacBook with the sound coming from what’s playing in it. But every time I do that, there’s no sound. Thanks

MacBook Air 13″, macOS 12.6

Posted on Dec 21, 2022 08:49 AM

Reply
Question marked as Top-ranking reply

Posted on Dec 21, 2022 10:20 AM

to record the mac's internal sound with quicktime you need additional software. i use the free BlackHole Virtual Audio Driver. then you can choose "BlackHole 2ch" in the recording options instead of "Built-in Microphone."


you will also need to set up a multi-output device in your audio MIDI setup utility to be able to both hear and record the internal audio at the same time.


to set up a multi-output device:


Open Audio MIDI Setup: (found in /Applications/Utilities)

hit the '+' button in the bottom left corner and select "Create Multi Output Device"


then in the panel that appears on the right, in the Multi-Output Device tab, select "Built-in Output" AND "BlackHole 2ch". (and, if you want, any of your other connected devices.)


once you do that, (and BEFORE recording) you can choose "BlackHole 2ch" or "Multi-Output Device" in your menubar "sound options". 


to both hear the speakers and record the audio at the same time, choose "Multi-Output Device". before choosing multi-out, set the internal speakers' volume to a comfortable level first. you cannot control the volume once you are in multi-out mode.

3 replies
Question marked as Top-ranking reply

Dec 21, 2022 10:20 AM in response to Moy509

to record the mac's internal sound with quicktime you need additional software. i use the free BlackHole Virtual Audio Driver. then you can choose "BlackHole 2ch" in the recording options instead of "Built-in Microphone."


you will also need to set up a multi-output device in your audio MIDI setup utility to be able to both hear and record the internal audio at the same time.


to set up a multi-output device:


Open Audio MIDI Setup: (found in /Applications/Utilities)

hit the '+' button in the bottom left corner and select "Create Multi Output Device"


then in the panel that appears on the right, in the Multi-Output Device tab, select "Built-in Output" AND "BlackHole 2ch". (and, if you want, any of your other connected devices.)


once you do that, (and BEFORE recording) you can choose "BlackHole 2ch" or "Multi-Output Device" in your menubar "sound options". 


to both hear the speakers and record the audio at the same time, choose "Multi-Output Device". before choosing multi-out, set the internal speakers' volume to a comfortable level first. you cannot control the volume once you are in multi-out mode.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Screen record with sound

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.