flashing question mark folder after deleting harddrive (CMD + R boot up not working)

Question

Level 1

4 points

flashing question mark folder after deleting harddrive (CMD + R boot up not working)

Hello community,

I own a 2009 iMac which had HighSierra OS installed. After i deleted the 1 TB Harddrive (which i accessed via the cmd + r recovery mode) the iMac shows the dubious flashing question mark folder on boot up.

I know that a common solution is to reboot the iMac into the Recovery Mode, but that is not possible in my situation. The iMac wont boot into the recovery mode. I've tried to boot it with several key combinations such as holding down the option key or cmd, option, p, r etc. but nothing changes.

If i hold down the option key during boot up the only thing which happens is that the mouse arrow appears instead of the flashing question mark folder.

Please help me, best regards and thanks in advance

Posted on Aug 4, 2022 4:50 AM

Reply

Answer 1

Top-ranking reply

BDAqua

Level 10

245,459 points

Aug 4, 2022 7:20 AM in response to iMacdonalds

You may need a cheap PC USB Keyboard to overcome this.

1. Start up from macOS Recovery

To start up from macOS Recovery, turn on your Mac and immediately press and hold one of the following combinations on your keyboard. Command-R is generally recommended, especially if you never installed macOS Sierra 10.12.4 or later… How to reinstall macOS - Apple Support

Command (⌘)-R

Install the latest macOS that was installed on your Mac.

Option-⌘-R

Upgrade to the latest macOS compatible with your Mac.

Shift-Option-⌘-R

Install the macOS that came with your Mac, or the closest version still available.

2. Decide whether to erase (format) your disk

If you need to erase your disk before installing macOS, select Disk Utility from the Utilities window, then click Continue. You probably don't need to erase, unless you're selling or giving away your Mac or have an issue that requires you to erase. Learn more about when and how to erase.

3. Install macOS

After starting up from macOS Recovery, follow these steps to install macOS:

Choose Reinstall macOS (or Reinstall OS X) from the Utilities window.
Click Continue, then follow the onscreen instructions to choose your disk and begin installation.
If the installer asks to unlock your disk, enter the password you use to log in to your Mac. If it doesn't see your disk, or it says that it can't install on your computer or volume, you might need to erase your disk.

Please allow installation to complete without putting your Mac to sleep or closing its lid. During installation, your Mac might restart and show a progress bar several times, and the screen might be empty for minutes at a time.

If your Mac restarts to a setup assistant, but you're selling or giving it away, press Command-Q to quit the assistant without completing setup. Then click Shut Down. When the new owner starts up the Mac, they can use their own information to complete setup.

If you never installed macOS Sierra 10.12.4

If macOS Sierra 10.12.4 or later was never installed on your Mac, macOS Recovery works differently:

Command-R is still the recommended way to start up from macOS Recovery. This combination makes sure that the installation isn't associated with your Apple ID, which is important if you're selling or giving away your Mac.
Option-Command-R installs the macOS that came with your Mac, or the closest version still available.
Shift-Option-Command-R isn't available.

How to reinstall macOS - Apple Support

Reply

flashing question mark folder after deleting harddrive (CMD + R boot up not working)

Similar questions