You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

How to downgrade my macOS version?

I tried to install Big Sur to my Mac computer and something went wrong. How do I get my computer back to the way it was when I bought it?


[Re-Titled by Moderator]

Posted on Jul 15, 2021 11:51 AM

Reply
Question marked as Top-ranking reply

Posted on Jul 15, 2021 5:34 PM

Perform a clean install of macOS by booting into Internet Recovery Mode using Command + Option + Shift + R to boot into the oldest online macOS for your Mac (usually for the OS that shipped with the Mac from the factory). If you have access to another compatible Mac which can run the previously installed version of macOS, then you can create a bootable macOS USB installer.


You will need to erase the whole physical drive, but how you do this depends on which version of macOS you end up installing. If you are booting a macOS 10.13+ installer, then you need to click "View" within Disk Utility and select "Show All Devices" so that the physical drive appears on the left pane of Disk Utility. Then erase the physical drive as GUID partition and APFS (top option) if installing macOS 10.13+, otherwise erase the physical drive as GUID partition and MacOS Extended (Journaled) if installing macOS 10.11 or 10.12. If you are installing macOS 10.6 to 10.10, then you need to partition and format the physical drive using the instructions in this article:

https://www.owcdigital.com/assets/support/support-formatting-and-migration/Mac_Formatting_6-10.pdf


Keep in mind a clean install erases & destroys all data on the drive so I hope you have your data backed up.


You should always have frequent & regular backups.

1 reply
Question marked as Top-ranking reply

Jul 15, 2021 5:34 PM in response to roosterjk66

Perform a clean install of macOS by booting into Internet Recovery Mode using Command + Option + Shift + R to boot into the oldest online macOS for your Mac (usually for the OS that shipped with the Mac from the factory). If you have access to another compatible Mac which can run the previously installed version of macOS, then you can create a bootable macOS USB installer.


You will need to erase the whole physical drive, but how you do this depends on which version of macOS you end up installing. If you are booting a macOS 10.13+ installer, then you need to click "View" within Disk Utility and select "Show All Devices" so that the physical drive appears on the left pane of Disk Utility. Then erase the physical drive as GUID partition and APFS (top option) if installing macOS 10.13+, otherwise erase the physical drive as GUID partition and MacOS Extended (Journaled) if installing macOS 10.11 or 10.12. If you are installing macOS 10.6 to 10.10, then you need to partition and format the physical drive using the instructions in this article:

https://www.owcdigital.com/assets/support/support-formatting-and-migration/Mac_Formatting_6-10.pdf


Keep in mind a clean install erases & destroys all data on the drive so I hope you have your data backed up.


You should always have frequent & regular backups.

How to downgrade my macOS version?

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.