You can make a difference in the Apple Support Community!
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
Whenever I use Command Tab to switch between apps on Mojave, my cursor disappears. Even when I hit Command Tab again to come back to the app I was in before, the cursor is still missing. I can use right-click or go to Mission Control to bring it back, but this is a new issue I've never had before, and it's really bothersome to have to keep doing this to stop my mouse from disappearing.
Any tips?
MacBook Pro 13", macOS 10.14
On my Mojave system, when I press Command-Tab, my cursor turns into a white gloved hand.
So I would suggest booting into Safe mode to see if it is 3rd party software
http://support.apple.com/kb/ht1564
This will not load any 3rd party additions, it will load some more conservative Apple drivers (may cause screen flicker), and it will clear some kernel caches (a cache is saved data in a form that can speed up a program, but is totally redundant to the original source, and thus can be safely cleared). Booting into Safe mode is just an experiment, but can frequently eliminate any 3rd party interference, or a cached item out-of-sync with the world. (Verify Safe mode via Applications -> Utilities -> System Information -> Software -> Boot Mode -> Safe vs Normal)
You should also try an SMC reset and an NVRAM reset
Reset the System Management Controller (SMC) on your Mac - Apple Support
https://support.apple.com/en-us/HT201295
How to reset NVRAM on your Mac - Apple Support
On my Mojave system, when I press Command-Tab, my cursor turns into a white gloved hand.
So I would suggest booting into Safe mode to see if it is 3rd party software
http://support.apple.com/kb/ht1564
This will not load any 3rd party additions, it will load some more conservative Apple drivers (may cause screen flicker), and it will clear some kernel caches (a cache is saved data in a form that can speed up a program, but is totally redundant to the original source, and thus can be safely cleared). Booting into Safe mode is just an experiment, but can frequently eliminate any 3rd party interference, or a cached item out-of-sync with the world. (Verify Safe mode via Applications -> Utilities -> System Information -> Software -> Boot Mode -> Safe vs Normal)
You should also try an SMC reset and an NVRAM reset
Reset the System Management Controller (SMC) on your Mac - Apple Support
https://support.apple.com/en-us/HT201295
How to reset NVRAM on your Mac - Apple Support
You do not say what exact Mac /model /year /size /retina /touchbar is this
or
what exact macOS you are currently running?
I have been seeing some reports here of this issue— it seems a possible bug...
Non the less—you can try resetting NVRAM/PRAM http://support.apple.com/kb/ht1379
and
Try resetting the SMC https://support.apple.com/en-us/HT201295
To trouble shoot further you can:
Try a SafeBoot https://support.apple.com/en-us/HT201262
Takes noticeable longer to get to the login screen, does a 5-15 minute disk repair before it fully boots up, and certain system caches get cleared and rebuilt, including dynamic loader cache, etc. Login and test. Reboot and test —sometimes a Safe Boot is all it takes to resolve anomalies like yours.
This test will tell you if third party interference; extensions etc are not loaded in safe boot mode.
Test issue in another user (or guest user) account https://support.apple.com/en-us/HT204443
This will tell you if it a universal issue or isolated to your user/admin account.
Disappearing Mouse Cursor when using Command + Tab
