iPad screen mirroring problem since update to IOS 17.1.1

Thank you so much for your suggestion. I tried this on both my iPhone and my ipad, and i am still not able to enable screen mirroring. Thanks again. It really seems like it’s got something to do with the new version.

After ANY iOS/iPadOS upgrade/update, you should ALWAYS perform a simple hard reset/forced restart of your Apple mobile device.

For iPad models with a Home button, do a simple hard reset/forced restart of your iPad by holding down both the Home and sleep/wake/power button simultaneously until your iPad goes to black and restarts with Apple logo, then release the buttons.

OR

For much newer design iPad models, without a Home button, try the new simple hard reset/forced restart procedure for the new 2018-2022 iPad Pros, 2020/21 iPad Air 4 and 5, the 2021 iPad Mini 6 and the new 2022, 10th gen base models,

1. Press and release the volume button closest to the top Power button

2. Then immediately ( and quickly ) press and release the volume button farthest from the top Power button.

3. Then, press and hold the top single sleep/wake/power button You will see the Slide to Power off button, but keep on holding down the power button until you see the Apple logo, then let it go.

Once you have performed all the steps, wait for a few seconds and your 2018-2022 iPad will boot up completely to the iPad’s Lock screen.

Tap, read and follow this Apple support link below.

Force restart iPad - Apple Support

Best of Luck to You!

Hello MichelPM and all, after 17.1.2, screen mirroring was still not working. I did another hard restart of my television, and screen mirroring is back! Thank you so much for your patient support.

Thank you, I am having this same problem with my devices and mirroring to my LGTV ever since iOS 17.1.1 The 4 digit code doesn’t appear, just the notice on my device that it is unable to connect. My Airplay/Handoff was already set to automatic. Do you have any other ideas that might solve this? Thank you again for trying to help.

When Airplay is first launched on both the Apple device and, consequently, when Apple AirPlay is,automatically, launched on the Apple AirPlay compatible TV ,it will,,usually, pop up a 4-digit code on the TV, followed by a pop-up window on the device to input that 4-digit code, seen on the TV, on the Apple device.

Is Apple Airplay not doing this?

On the iPad, Go to the Settings app, under the General settings panel.

Look for and tap the settings panel labelled AirPlay & Handoff.

Tap the Automatic setting to activate it ( if Automatic isn’t already checked/activated and try AirPlay mirroring to your TV, again.

Best of Luck to You!

Does your TV have any settings that address Apple AirPlay on your TV?

Are you AirPlaying to a TV or an external streaming box (TV, Roku, Amazon Firestick or other streaming box, like a Comcast Flex box? )

Does your TV or streaming box have any type of software or OS that needs some periodic updating.

That would be the next place/s to look at.

Has anyone figured out a fix for this? Ever since 17.1.1, I’m not able to screen mirror from any of my devices. I had hoped that 17.1.2 would address this, but it did not. Thank you.