You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

1008F on MBK 2018, I tried everthing :(

I upgraded from BigSur to Montery, and for a reason I created a USB installer, changed settings for T2, booted to recovery, erased the disc and tried to reinstall. and nothing worked !

I got stuck in a boot fail limbo, tried everything solution, reset SMS, PRAM,

Option + Command + R,

Shift +Option R,

Option R,

Option,

Shift and boot from USB Montery installer


Tried revive app ( from older macbookair) altho I am not sure of the cable(s) if Apple certified never the less I was able to lunch the operation ( revive or erase) but i got fail message at the end.


I called Apple today, spoke to a person and "senior" advisor who noticed I tried everything and finally said I probably need to send it for hardware check up and take it from there.

I am pretty sure the hardware is ok and its a glitch somewhere. I dont feel paying the 100 buck to hear it. I mean what hardware could be broke from my problem description, also if it was that, there should be a very defined syndrome for it


whenever I (re) try to install or recovery mode : i get the globe turning and turning before i get the 1008F error message. Tried connection to wifii and today i bought certified Apple ethernet adapter, still no luck.


Anyone could advice ?


Also, what about booting to terminal before safe mode and do the job from there, after all should be "just a UNIX" ?


Would it be possible to work out a virtual machine ( no apple hardware ) and try connect to my macbook from there ?

( did i Mention cant get to safe mode recovery ?)


best


A


Posted on Nov 2, 2021 3:14 PM

Reply
Question marked as Top-ranking reply

Posted on Nov 3, 2021 2:55 AM

To perform this action will require booting from a Bootable Installer


This will have to be performed from a Qualifying Computer to run the version of macOS to be made on the Bootable Installer. Example : Bootable Installer of Big Sur would have to be done on a computer that Qualifies to run Big Sur.


Once that is done read on for preparing the Destination computer  >> Only works on Intel Based Apple Computers.


Extra Special Notation regarding the Touch ID equipped Apple Computer. >>>About Startup Security Utility and Must Enable from Recovery Mode the ability to boot from External Drive Before Attempting 


1 - Shutdown computer and disconnect all external drive Except the newly created Bootable Installer.


2- Restart and immediately hold the OPTION key until the Startup Manager appears and choose the USB Drive. 


3 - It will present options >> Disk Utilities >> View >> View ALL attached Drives. 


4 - Choose the Upper Most Drive ( not the volumes indented and list below ).


5 - The drive normally is called Apple Media or Apple SSD - that is the drive to Erase and format as APFS with the GUID Partition Map. 


6 - Once that is done >> backup out of Disk Utilities and choose install macOS. 


7 - Follow the prompts and it may automatically reboot several time. 


8 - Upon a final reboot - Setup Assist will present with the newer version of macOS.

Similar questions

4 replies
Question marked as Top-ranking reply

Nov 3, 2021 2:55 AM in response to arth113

To perform this action will require booting from a Bootable Installer


This will have to be performed from a Qualifying Computer to run the version of macOS to be made on the Bootable Installer. Example : Bootable Installer of Big Sur would have to be done on a computer that Qualifies to run Big Sur.


Once that is done read on for preparing the Destination computer  >> Only works on Intel Based Apple Computers.


Extra Special Notation regarding the Touch ID equipped Apple Computer. >>>About Startup Security Utility and Must Enable from Recovery Mode the ability to boot from External Drive Before Attempting 


1 - Shutdown computer and disconnect all external drive Except the newly created Bootable Installer.


2- Restart and immediately hold the OPTION key until the Startup Manager appears and choose the USB Drive. 


3 - It will present options >> Disk Utilities >> View >> View ALL attached Drives. 


4 - Choose the Upper Most Drive ( not the volumes indented and list below ).


5 - The drive normally is called Apple Media or Apple SSD - that is the drive to Erase and format as APFS with the GUID Partition Map. 


6 - Once that is done >> backup out of Disk Utilities and choose install macOS. 


7 - Follow the prompts and it may automatically reboot several time. 


8 - Upon a final reboot - Setup Assist will present with the newer version of macOS.

1008F on MBK 2018, I tried everthing :(

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.