You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

How do you start up iMac with a new hard disk installed

How do you start up an old (2015) iMac with a new hard disk just installed?



Posted on Jun 30, 2020 1:56 PM

Reply
Question marked as Top-ranking reply

Posted on Jun 30, 2020 2:12 PM

Internet/Network Recovery of El Capitan or Later on a Clean Disk


     If possible, back up your files before proceeding.


  1. Restart the computer. Immediately, at or before the chime, hold down the (Command-Option-R) keys until a globe appears.
  2. The Utility Menu will appear in from 5-20 minutes. Be patient.
  3. Select Disk Utility and click on the Continue button.
  4. When Disk Utility loads select the target drive (out-dented entry w/type and size) from the side list.
  5. Click on the Erase button in Disk Utility's toolbar. A panel will drop down.
  6. Set the partition scheme to GUID.
  7. Set the Format type to APFS (SSDs, only if installing Mojave or Catalina ) or Mac OS Extended, (Journaled.)
  8. Provide a volume name, usually "Macintosh HD."
  9. Click on the Apply button, then click on the Done button when it activates.
  10. Quit Disk Utility and return to the Utility Menu.
  11. Select Install OS X and click on the Continue button.


1 reply
Question marked as Top-ranking reply

Jun 30, 2020 2:12 PM in response to 4nbwhatsgoingon

Internet/Network Recovery of El Capitan or Later on a Clean Disk


     If possible, back up your files before proceeding.


  1. Restart the computer. Immediately, at or before the chime, hold down the (Command-Option-R) keys until a globe appears.
  2. The Utility Menu will appear in from 5-20 minutes. Be patient.
  3. Select Disk Utility and click on the Continue button.
  4. When Disk Utility loads select the target drive (out-dented entry w/type and size) from the side list.
  5. Click on the Erase button in Disk Utility's toolbar. A panel will drop down.
  6. Set the partition scheme to GUID.
  7. Set the Format type to APFS (SSDs, only if installing Mojave or Catalina ) or Mac OS Extended, (Journaled.)
  8. Provide a volume name, usually "Macintosh HD."
  9. Click on the Apply button, then click on the Done button when it activates.
  10. Quit Disk Utility and return to the Utility Menu.
  11. Select Install OS X and click on the Continue button.


How do you start up iMac with a new hard disk installed

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.